RAL Epoxy powder coating with high anticorrosion

1Ral color,type,gloss Powder Coating 2 UV resistance powder paint 3 ISO 4 RoHS 5 professional service

We supply RAL epoxy powder coating .

Physical properties of powderpaint

Weight: 1.2 ~ 1.8 (because of the color and luster vary)

Particle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity: 24 ~ 27 mm

Curing conditions

180 °C ~ 200 °C (work piece temperature), 15 minutes

Average coverage

8-10 square meters / kg, thickness 70 microns (100% of the powder coating utilization rate)

Packaging

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

Storage and transport

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

Health and Safety

The powder coating is a non-toxic products, but should be avoided in the course of inhalation of dust. Proposed operators wear appropriate dust mask, glasses. If possible, try to avoid long-term skin contact with powder coating.

RAL Epoxy powder coating with high anticorrosion